Ce Certificate Stone Jaw Crusher

Capacities and product gradations produced by cone crushers are affected by the method of feeding, characteristics of the material fed, speed of the machine, power applied, and other factors.Hardness, compressive strength, mineral content, grain structure, plasticity, size and shape of feed particles, moisture content, and other characteristics of the material also affect production capacities and gradations.Gradations and capacities are most often based on a typical, well-graded choke feed to the crusher.Well-graded feed is considered to be 90% to 100% passing the closed side feed opening, 40% to 60% passing the midpoint of the crushing chamber on the closed side (average of the closed side feed opening and closed side setting), and 0 to 10% passing the closed side setting.Choke feed is considered to be material located 360 degrees around the crushing head and approximately 6 above the mantle nut.Maximum feed size is the average of the open side feed opening and closed side feed opening.

Introduction:symons cone crusher is widely used in the metallurgical industry, construction materials industry, road building industry, chemical industry and silicate industry.It is suitable to crush ores and rocks with medium hardness and medium hardness above.It has features of strong crushing force, reliable structure, high efficiency, high capacity, low operating cost, easy adjustment, economical to use and so on.Also symons cone crusher uses the compensating lubricating grease sealing, it can avoid lubrication oil being polluted by dust, so that all parts work reliably and have a long operating life.The safety insurance system of cone crusher uses several spring sets, so the matter and iron ore are down from the crushing cavity and do not damage the crusher, simply and reliably.The cone crusher has standard type and short head type, the standard type is suitable to medium size and the short head type for medium and fine crushing.

Extec pitbull / extec c-10 jaw crusher, 2003 year, only 3271 hours worked from new, deutz engine. 1000mm x 650mm jaw opening, jaws opening, jaws approx 65% good, will produce between 150-+250 tonnes per hour. full hydraulic adjustment on jaws, machine also fitted with over band.Magnet + side/dirt conveyor. hydraulic landing legs installed + vibrating grizzly feeder. machine in very good condition.

Bolt-on pitman lip all elrus jaw crushers feature bolt-on manganese support lips.The bolt-on lips gives the owner/operator the option to bolt-on the lip rather than having to weld it in place.Therefore they are easy to maintain and replace during liner changes.

Its true that entire textbooks have been dedicated to the extraction and processing of rocks and minerals, and knowing the capacity of a particular rock crusher for sale can be difficult without seeing it in person, taking measurements, and verifying information with the manufacturer.Of course, the main thing you need to know before you even ask this question is how many tons your operation is looking to process per hour or day.Shopping for crushing equipment before you know this fact will be almost impossible.

A cone crusher is punished during every minute of operation.It squeezes a.Essential to keep your crusher and your output in prime condition.Evidence of an oil leak or excessive.This will have a negative effect on the performance.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

Your demand

Contact Information

Zhengzhou High-tech Zone, China

[email protected]

Related Blogs

Copyright© 2020 DRiveOn machinery.All rights reserved. Sitemap