Raw materials are fed from the top of the combination crusher, and fall into the rotating impeller at a high speed to be crushed.As other materials simultaneously fall around the rotating impeller, the two kinds of materials join together and are crushed by each other.The materials are crushed many times in and around the impeller of the combination crusher, and are finally discharged from beneath the machine.Via a closed loop, controlled by screening equipment, the product achieves its required final size.
Stone crusher use the function of extruding and twisting between two jaw board, which can have a coarse and medium crushing for material.The crushing part includes fixed jaw board and movable jaw board.When the two boards are close, the material will be crushed; when the two boards are far away, the finished product will be layout.This intermittent working principle has a simple structure, reliable working and can crush hard material, which are widely used in ore selecting and separating, building material, silicate and ceramics.
The jaw crusher is installed on the concrete foundation.In order to reduce vibration and hum, a layer of hardwood, rubber or other vibration-absorptive material should be placed between the frame and the concrete.The horizontal and vertical levels of the frame mounted on the wooden base shall be in accordance with the requirements, and the backing between the frame foot and the soil shall be flat, uniform and stable.Before installing, the sliding bearing is researched and placed and then placed in the bearing housing.The horizontal value and the eccentricity deviation value are measured by the level meter.If the inner diameter is within the allowable range, the eccentric shaft can be placed on the bearing.
Komatsus original large-capacity jaw crusher and the most advanced control systems have considerably increased its output capacity, making it easy to manage large workloads.
1) ore crushingconcentrators generally use coarse crushed, middle broken and fine broken; these three stages of crushing process are used to break ore.Coarse broken process usually use gyratory crusher by 1.2m or 1.5m, broken process usually use standard cone-type rock breaking machine by 2.1m or 2.2m, fine broken process use short head cone crusher by 2.1m or 2.2m.Through the rough crushing ore, the block size is no more than 1m, then after the broken and fine broken process, the size of sieving ore stone will be made less than 12mm as finished product and delivered to the grinding groove.Iron ore crusher.
Besides, we also provide you with related products such as cone crusher, crusher, stone crusher, spring cone crusher, rock crusher, jaw crusher, crusher machine, hydraulic crusher, hp cone crusher, symons cone crusher, mining machinery, mining machine and mining equipment for your choice.
Copyright© 2020 DRiveOn machinery.All rights reserved. Sitemap