In the case of no electricity, power failure or voltage instability, the diesel power generation system can be used to ensure continuous operation, so that the crusher can work high-efficient and bring more profits.
Want to feature your creature? upload a photo of your pet at rock crusher canyon rv park!you can also share by using the hashtag #bringfido on facebook,twitterorinstagram.
Since the use of self-grinding and semi-self-grinding technology in the 1950s, it has grown into a mature, reliable and continuously applied technology.In the self-grinding process, the ore larger than 100 mm in the mill acts as a grinding medium.The ore material with less than 80 mm and more than 20 mm has poor grinding ability, and it is not easily broken by large ore materials, sometimes when the material is crushed, a steel ball of about 4% to 8% of the volume of the mill is often added to the mill, which improves the grinding efficiency of the mill, and thus semi-self-grinding occurs.The semi-autogenous mill belongs to a cylindrical mill with heavy load, low speed and large starting torque.Nowadays, both the new expansion and the renovation of the old factory, almost all use self-grinding, semi-self-grinding technology, self-grinding, the semi-self-grinding technology eliminates the two-stage crusher and the screening equipment, simplifies the process and improves the operating conditions, which not only reduces the capital cost of the construction, but also reduces the production and operation costs, and also facilitates automation.
The material is crushed between the two jaws, so the wear of the liner is the main problem of the jaw crusher.And the types of wear and tear are mainly divided into the following cases.
Explain that the counter-shock crusher hammer or counter-attack lining is seriously worn, causing the gap between the hammer and the counter-attack plate to be too large, adjusting the back-and-forth impact frame clearance, or replacing the lining plate and the plate hammer; adjusting the position of the counter-attack frame so that the sides and the machine the gap between the lining plates is even; if the lining on the frame is seriously worn, it should be replaced in time.
Copyright© 2020 DRiveOn machinery.All rights reserved. Sitemap